Method to Set Coin WIFI
1. Connect mobile-phone to signal sent by coin WIFI.
2. Input http://192.168.200.1 in your browser to acquiesce in the user name as root, and the password as admin.
3. After logging in, click network-interface-WAN.
4. Choose a protocol type. For home dial-up, choose PPPOE; for static IP, choose Static address and for automatic acquisition, choose DHCP client.
Click “Switch protocol” after choosing your network protocol.
If the network protocol you have access to is a static address, please fill in the corresponding IP address and gateway according to your network.
If the network protocol you have access to is home dial-up PPPOE, you need to fill in the dial-up username and password.
Click “save application” after filling in the Internet type.
5. If both of your network and set are correct, you will hear a tickle from the machine to show that the machine has normal Internet and communications. After the network is connected normally, enter the coin and bulletin management setting to set corresponding bulletins and cost rate. For effect after setting the bulletin, enter into http://192.168.200.1:880.
6. Learn to use the coin machine for different coins
After the machine is connected to the Internet, make the mobile-phone close to the sensing field to turn on the lights. Press the button above the coin machine for 4 seconds until the indicator lights turn on, and then put in 30 coins to complete the learning.